How to achieve the effect in the attachment?
The corresponding Settings are not found in the example.
The above use of translation software, may be biased.
How do I change the Y axis origin
Moderator: Queue Moderators
-
- Posts: 2
- Joined: Fri Jul 15, 2022 7:25 am
How do I change the Y axis origin
- Attachments
-
- 790179e9289a4adda10bc3ff7e72a74.png (119.64 KiB) Viewed 1560 times
-
- Posts: 2
- Joined: Fri Jul 15, 2022 7:25 am
Re: How do I change the Y axis origin
As shown in the figure.
- Attachments
-
- Snipaste_2022-07-15_15-51-17.png (24.96 KiB) Viewed 1556 times
-
- Posts: 141
- Joined: Wed Mar 27, 2019 1:05 pm
Re: How do I change the Y axis origin
Hello,
If I understood correctly, you want to base level of the bars to be something else that 0, for example 67.26 like in the second picture. This can be achieved via BaseLevel property for the BarSeries.
barSeries.BaseLevel = 67.26;
Other settings should be found in the demo examples such as Bars with negative values or Simple bar chart.
Best regards,
Lasse
If I understood correctly, you want to base level of the bars to be something else that 0, for example 67.26 like in the second picture. This can be achieved via BaseLevel property for the BarSeries.
barSeries.BaseLevel = 67.26;
Other settings should be found in the demo examples such as Bars with negative values or Simple bar chart.
Best regards,
Lasse